Skip to main content

Posts

Showing posts with the label AIX

HACMP Moving Resources to Another node and Back Again to the main node

We have two servers AIX Hostname: aixtest1 Hostname: aixtest2 Moving Resource to other node --------------------------------   as root user   #smitty hacmp   Initialization and Standard Configuration   Extended Configuration   System Management (C-SPOC)   Problem Determination Tools    "SELECT C-SPOC"   Manage HACMP Services   HACMP Communication Interface Management   HACMP Resource Group and Application Management   HACMP Log Viewing and Management   HACMP File Collection Management   HACMP Security and Users Management   HACMP Logical Volume Management   HACMP Concurrent Logical Volume Management   HACMP Physical Volume Management    "SELECT HACMP Resource Group and Application Management"   Show the Current State of Applications and Resource Groups   Bring a Resource Group Online   Bring a Resource Group Offline   Move a Resource Group to Another Node / Site    "SELECT Move a Resource Group to Another Node / Site

How to configure AIX devices after symm(device) configuration change

In situations below, the disk devices will require re-configuration: 1. Converting SRDF from/to Non-SRDF device 2. Due to host failure or planned maintenance, RDF1 (R1) and RDF2 (R2) are swapped 3. Symmetrix FA ports attached to the host have sc3/sc2 bit set Before performing above change, proceed with following procedure: 1). Stop All running EMC Agents including EMC ControlCenter, Symmetrix, Storage Device Management Agents. 2). Stop all Applications use Symmetrix devices 3). Unmount the filesystems: # umount <Filesystem> 4). Vary off the volumegroups # varyoffvg <VGname> 5). Skipp step5 to step7 if no powerpath installed. If PowerPath is installed, you need to de-configure PowerPath: #powermt remove hba=all dev=all 6). Deconfigure the fscsi driver and hdisks: # rmdev -Rdl fscsi<n> 7). Switch off the Fibre Adapter: # rmdev -dRl fcs<n> After complete the RDF swap or changes listed above proceed with below procedure: 1).

HOW TO IBM GPFS General Parallel File System

HOW TO GPFS INSTALLATION AND CONFIGURATION     WHERE THE LOGS ARE LOCATED   /var/adm/ras DAEMON FOR GPFS # ps -ef | grep mmfsd     root 360580 409850    0 14:07:18       -   0:00 /usr/lpp/mmfs/bin/aix64/mmfsd64 en0: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>         inet 10.1.1.2 netmask 0xffffff00 broadcast 9.6.156.255          tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1 # ifconfig -a en0: flags=1e080863,480<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST,GROUPRT,64BIT,CHECKSUM_OFFLOAD(ACTIVE),CHAIN>         inet 10.1.1.3 netmask 0xffffff00 broadcast 9.6.156.255          tcp_sendspace 262144 tcp_recvspace 262144 rfc1323 1 PORT #netstat -an | grep 1191 Install the GPFS product   It edit the /etc/inittab file adding the following lines guigpfs and mmfs # mount 10.1.1.20:/export/nim/GPFS /mnt  (Install Media) root@AIX1 [/] # df -k Filesystem     1024